Ostrich Wing Awning

Description

Please call or email with order if you want RH or LH mounting or Olive Green or Grey. Free Shipping to the Lower 48 The original, free-standing 270 Awning, since 2008. Beware of imitations. Introducing the Ostrich Wing Awning by Big Country 4×4, South Africa. 120 square feet of shade in 30 seconds. Unmatched strength. Designed, tried and tested in the African Savannah since 2008. Constructed of 12.2oz (380gsm) rip-block canvas, UV protected and rot proofed. Designed primarily as a sun shade the canvas is acrylic impregnated and waterhead tested to 800mm, while stitch seams are sealed for further waterproofing. Every awning now includes a 2-color LED strip light for mounting inside the arms. The awning frame is built with thick aluminum extrusions welded in a gusseted truss design, supported on nylon bushes. This cantilevered awning is made for the toughest adventures, this will not break in a breeze and is backed by a 2 year warranty.   The Ostrich Wing is designed to be used without support legs in no wind or mild wind settings. In gusty conditions a single telescopic support pole should be deployed and the frame tied down using the frame-mounted eyelets provided. 2 further support poles are included to support the optional wall kit, if added. In adverse conditions it is advised to pack the awning away. At no point should the awning be left unattended open without anchoring. Included items:  Storm kit tie downs with stakes Water run-off tensioners with stakes 12V White + Amber LED light 3 legs for adverse conditions & to support optional wall kit)  Mounted weight: 50lbs Mounted length: 104″ Mounting: This is a significant awning and it requires a robust roof rack, load bar setup or truck canopy mounting point for safe installation. Our mounting kits are: Standard fitting kit (welded roof racks with a 71″ long M8 compatible channel) Front Runner fitting kit (bolted aluminum roof racks – addition of a 2nd Z-bracket) L-brackets for load bar mounting (5mm mild steel, heavy duty) Universal corner brackets (Rhino Rack and others – screwed to the rack) Tent fitting kit (thin walled aluminum RTT) (Bundu Tech Tents, etc) Tent fitting kit (thick walled aluminum RTT) (Big Country 4×4 Penthouse)  The two mounting points must be a minimum 71″ apart.  Available extras:  Wall Kit in two heights (83″, 94″) LED light kit